Frequency Range | 5 MHz to 2,5 GHz (5 MHz to 3.3 GHz option 59802) |
Resolution | 1 KHz |
Span | 100, 200, 500 KHz, 1, 2, 5, 10, 20, 50, 100, 200, 500 MHz, 1.0 , 1.5, 2.0 and 2,5 GHz. |
RBW |
300, 600 Hz, 1, 2.4, 4.8, 9, 18, 36, 100, 200, 300, 400, 800 KHz, 1.6, 3,2 and 6.4 MHz. Auto with SPAN. User define |
VBW |
100 Hz to 1 KHz in multiples of 100 Hz. 10 KHz to 20 KHz in multiples of 5 KHz Auto with SPAN and RBW. User define |
Maximum Level Measurement | +22 dBm |
Logarithmic level axis | 1, 2, 5 and 10 dB. |
Setting range of reference level | -105 dBm to +20 dBm |
Automatic Reference Level | Yes with saturation automatic detection |
Maximumnumber of traces | 2 |
Trace Functions | Max Hold, Min Hold |
Marks | 3 with searching peak function. |
Trigger Level Function | Enabled |
BER in Spectrum |
Quality signal measure for DVB in spectrum mode: DVB-T, DVB-C and DVB-T2 (only option 598901) with span between 5-20 MHz DVB-S and DVB-S2 |
Frequency working bands
FM | 80-110 MHz |
DVB-T, DVB-C | 20 MHz to 880 MHz |
DVB-T2 | 20 MHz to 880 MHz (only option 598901) |
DVB-S, DVB-S2 | 950 MHz to 2150 MHZ |
Extended Range (DVB-T, DVB-C) |
20 MHz to 1500 MHz |
TV Analyzer Mode (Combo Mode and Measure Mode)Analog TV Analyzer
Standards | |
TV Standards | Pal B/G,D/K, I, Secam B/G, L, D/K, NTSC |
Sound standards | In line with TV standard. User selection Nicam. |
Measurements | |
Vision Carrier Level | Up to 20 dBm |
Carrier Noise Level ratio | < 1.0 to 52 dB. |
In line Carrier Noise Level ratio |
<1.0 to 52 dB. Default line 6. User define line between 3 and 25. |
Vision/sound carrier level ratio | <1.0 to 30 dB. |
Graphical Measurements | |
Line Representation | line 1 to 625. W ith offset and zoom function. |
Synchronism | Enable. |
General Data | |
Automatic detection analog and digital channel | |
Simultaneous display of measurement, TV image and spectrum (Combo Mode) |
DIGITAL TV Analyzer DVB-T2
Standards | |
Terrestrial DTV in line with ETSI EN 302755 | |
Automatic detection DVB-T2 or DVB-T. | |
Bandwidth | Automatic in line with channel plan or manual selection 5,6 ,7,8 MHz. |
FFT mode | Automatic or manual selection 1K,2K,4K,8K,16K,32K |
QAM order | Automatic or manual selection 4QAM, 16QAM, 64 QAM and 256 QAM Normal or rotated constellation. |
Guard Interval | Automatic or manual selection 1/32, 1/16, 1/8, ¼. 1/128, 19/128, 19/256 |
Code Rate | Automatic |
Spectrum Inversion | Automatic or manual selection ON, OFF. |
Multi PLP | Enable |
Frequency Range | |
Working Band | 20 MHz – 880 MHz |
Extended Working Band | 20 MHz – 1500 MHz |
Measurements | |
Power | Range: -90 dBm to 20 dBm. |
C/N | Up to 52 db |
LDPCBER | Bit error rate before LDPC |
BCHBER | Bit error rate before RS |
MER | Range: 16 dB to 35 dB (64 – 256 QAM) 10 dB to 35 dB (16 QAM) 4 dB to 35 dB (QPSK) |
PdP | Echoes without demodulation. Zoom 287 μS, 574 μS and 1148 μS. |
Constellation | Selectable carrier number (Normal or rotated constellation) |
Uncorrected Packet Analysis | Enabled |
MER versus Frequency | Graphical measure with numerical indication (MER RMS, MER max, MER min) |
Echoes | Pre and Post Echoes Visualization |
TV picture on display | |
Simultaneous display of measurement, TV image and analog spectrum (Combo Mode) | |
Visualization Free to air MPEG2 channels. | |
Visualization Free to air MPEG4 channels (up to 1080p) with sound demodulation compatible with Dolby ® AC3, DD+ and AAC. | |
Common interface for encrypted channel compatible with DVB-CI. (*2) |
DVB-T
Standards | |
Terrestrial DTV in line with ETSI EN 30044 | |
Automatic standard detection DVB-T and DVB-T2 | |
Bandwidth | Automatic in line with channel plan or manual selection 7,8 MHz. |
FFT mode | Automatic or manual selection 2K,8K |
QAM order | Automatic or manual selection 4QAM, 16QAM and 64 QAM |
Guard Interval | Automatic or manual selection ¼, 1/8, 1/16, 1/32 |
Code Rate | Automatic |
Spectrum Inversion | Automatic or manual selection ON, OFF. |
Frequency Range | |
Working Band | 20 MHz – 880 MHz |
Extended Working Band | 20 MHz – 1500 MHz |
Frequency Offset | Auto or manual selection (± 1/6, ± 2/6 , ± 3/6 MHz of central frequency) |
Measurements | |
Power | Range: -90 dBm to 20 dBm. |
Minimum QEF input signal: -71 dBm (preamplifier ON, RF: 626 MHz, 64 QAM, GI=1/8, CR 5/6). |
|
C/N | Up to 52 db |
CBER | Bit error rate before Viterbi |
VBER | Bit error rate before RS |
MER | Range: 16 dB to 35 dB (64 QAM) 10 dB to 35 dB (16 QAM) 4 dB to 35 dB (QPSK) |
MER versus Carrier | Graphical measure with numerical indication (MER RMS, MER maximum, MER minimum) |
PdP | Echoes without demodulation. Zoom 287 μS, 574 μS and 1148 μS. |
Echoes | Pre and Post Echoes Visualization |
Constellation | Selectable carrier number |
Uncorrected Packet Analysis | Enabled |
TV picture on display | |
Simultaneous display of measurement, TV image and spectrum (Combo Mode) | |
Visualization Free to air MPEG2 channels. | |
Visualization Free to air MPEG4 channels (up to 1080p) with sound demodulation compatible with Dolby ® AC3, DD+ and AAC. | |
Common interface for encrypted channel compatible with DVB-CI. (*2) |
DVB-C
Standards | |
Cable TV J.83/A/C | |
Bandwidth | Automatic in line with channel plan or manual selection |
QAM order | Automatic or manual selection 4,16,32,64,128 and 256QAM |
Symbol Rate | Automatic or manual selection (700 - 7200 MSymbs) |
Spectrum Inversion | Automatic or manual selection ON, OFF. |
DFE Filter | ON/OFF manual selection |
Frequency Range | |
Working Band | 20 MHz – 880 MHz |
Extended Working Band | 20 MHz – 1500 MHz |
Measurements | |
Power | Range: -90 dBm to 20 dBm. |
Minimum QEF input signal: -64 dBm (preamplifier ON, RF: 626 MHz, 64 QAM, 6875 Msymb).(*1) |
|
C/N | Up to 52 db |
CBER | Bit error rate before RS |
MER | Range: 18 dB to 38 dB |
Constellation | Enabled |
Uncorrected Packet Analysis | Enabled |
TV picture on display | |
Simultaneous display of measurement, TV image and analog spectrum (Combo Mode) | |
Visualization Free to air MPEG2 channels. | |
Visualization Free to air MPEG4 channels (up to 1080p) with sound demodulation compatible with Dolby ® AC3, DD+ and AAC. | |
Common interface for encrypted channel compatible with DVB-CI. (*2) |
DVB-S
Standards | |
Satellite Digital TV | |
Bandwidth | Automatic in line with channel plan or manual selection |
Code Rate | Automatic or manual selection ½, 2/3, ¾,5/6,7/8 |
Symbol Rate | Automatic or manual selection (1 - 45 Mbaud) |
Frequency Range | |
Working Band | 950 MHz – 2150 MHz |
Measurements | |
Power | Range: -90 dBm to 20 dBm. |
C/N | 1 dB to 30 dB |
CBER | Bit error rate before Viterbi |
VBER | Bit error rate before RS |
MER | Range: 5 dB to 20 dB |
Uncorrected Packet Analysis | |
TV picture on display | |
Simultaneous display of measurement, TV image and spectrum (Combo Mode) | |
Visualization Free to air MPEG2 channels. | |
Visualization Free to air MPEG4 channels (up to 1080p) with sound demodulation compatible with Dolby ® AC3, DD+ and AAC. | |
Common interface for encrypted channel compatible with DVB-CI. (*1) |
DVB-S2
Standards | |
2ª Generation Satellite Digital TV . QPSK and 8PSK compatible | |
Bandwidth | Automatic in line with channel plan or manual selection |
Symbol Rate | Automatic or manual selection : (1 - 36 Mbaud DVB-S2-8PSK) (1 – 30 Mbaud DVB-S2 -8PSK) |
Frequency Range | |
Working Band | 950 MHz – 2200 MHz |
Measurements | |
Power | Range: -90 dBm to 20 dBm. |
C/N | 1 dB to 30 dB |
Link Margin | -1 dB to 10 dB |
BER | Bit error rate before LDPC |
BCHBER | Bit error rate before BCH |
MER | Range: 5 dB to 20 dB |
Constellation | Enabled |
Uncorrected Packet Analysis | Enabled |
TV picture on display | |
Simultaneous display of measurement, TV image and spectrum (Combo Mode) | |
Visualization Free to air MPEG2 channels. | |
Visualization Free to air MPEG4 channels (up to 1080p) with sound demodulation compatible with Dolby ® AC3, DD+ and AAC. | |
Common interface for encrypted channel compatible with DVB-CI. (*1) |
General data
Operating Languages | English, Deutsch , Spanish, Portuguese, French, Italian, Russian, Czech and Polish. |
Display | TFT 640x480 5 . 7 ” |
Operating temperature range | 0 º C to + 40 º C |
Permissible temperature range |
0 º C to + 45 º C |
Storage temperature range |
-20º to 60 ºC |
Interfaces | |
USB | For update firmware and download data with GSuite PC application |
SD | SD interface up to 2 GB to datalogs and graphs storage. (SD card 2 GB included ) |
Common Interface | Compatible with DVB-CI (*) |
HDMI | HDMI 1.2. Digital Video Output |
ASI | Two modes: ASI IN (the BSA331 works as a transport stream receiver, to visualize or to analyze the transport content) ASI OUT (the BSA331 transfers the transport stream demodulated by the BSA331) |
Power supply | |
Input Voltage Range | 100 V to 240 V |
AC supply frequency | 50 Hz to 60 Hz |
AC input current | 1.5 A |
Power Consumption | 42 W |
Battery | |
Battery type | Lithium-ion |
Nominal battery output voltage | 7.2 V 9000 mAh |
Mechanical | |
Dimensions | 302,1 mm x 148.0 mm x 120.0 mm |
Weight | 2,1 Kg without Battery 2,480 Kg with Lithium Battery |
Recommended calibration interval |
12 months |
EMC | |
Radiated Emissions (30 MHz – 1000MHz) |
Complies with EN 61326-1:2006 class A |
Interference Voltage (150 KHz – 30 MHz) |
Complies with EN 61326:2006 - 7.2.B |
Interference Voltage (150 KHz – 30 MHz) |
Complies with EN 61326:2006 - 7.2.B |
Voltage Fluctuations (Flicker) |
Complies with EN 61326:2006 - 7.2.C |
Harmonics | Complies with EN 61326:2006 - 7.2.D |
Electrostatic discharge (ESD) | Complies with EN 61326:2006 - 6.2.A |
Electromagnetic Fields Immunity | Complies with EN 61326:2006 - 6.2.B |
Mechanical Resistance | |
Shock | Complies with EN 60068-2-27 |
Vibration | Sinusoidal complies with EN 60068-2-6 |
Random complies with 60068-2-64 |